The Audi 2.0 TFSI is one of the most widely used petrol engines Audi has built. You’ll find it in the A3, A4, A5, A6, Q3, Q5 and TT, and in many VW, SEAT and Skoda models. It’s strong and efficient, but some versions have well-known weaknesses. Knowing which engine you have, and what to look out for, can be the difference between a routine repair and a replacement engine.
Key points
- There are two main families of 2.0 TFSI: the earlier EA113 and the later EA888 (in three generations). Their common faults are different.
- The best-known problems are oil consumption, timing chain tensioner failure, carbon build-up on the intake valves and cam follower wear.
- Most of these faults give warning signs first. Acting early is usually far cheaper than waiting for a breakdown.
Audi 2.0 TFSI engine specs
| Layout | 2.0 litre turbocharged inline four-cylinder petrol |
| Fuel system | Direct injection (later EA888 engines add port injection) |
| Valvetrain | 16-valve DOHC with variable valve timing |
| Power | From around 170 PS in standard models to over 300 PS in performance versions |
| Engine families | EA113 (mid-2000s), then EA888 Gen 1, Gen 2 and Gen 3 |
Common Audi 2.0 TFSI engine problems
1. High oil consumption
Some EA888 Gen 2 engines, fitted from around 2008 to 2012, are known for burning oil. The usual cause is piston ring design, which lets oil past into the combustion chamber. Signs include needing to top up oil between services, blue smoke on start-up and an oil level warning on the dash. Left alone, low oil levels can damage the turbo, the timing chain and the engine itself.
2. Timing chain and tensioner failure
Early EA888 engines used a timing chain tensioner that can fail. When it does, the chain can jump a tooth, which can cause serious engine damage. A rattle from the engine for a few seconds on a cold start is the classic warning sign. Fault codes for camshaft and crankshaft correlation are another. If you hear a cold-start rattle, it’s worth having the engine checked straight away.
3. Carbon build-up on the intake valves
Because direct-injection engines spray fuel straight into the cylinder, fuel no longer washes over the intake valves. Over time carbon builds up on them, restricting airflow. Symptoms include misfires, a rough idle, hesitation and reduced power. It’s most common on EA113 and early EA888 engines.
4. Cam follower wear (EA113)
On the EA113 engine, the high-pressure fuel pump is driven by a cam follower that can wear through. If it isn’t caught, the camshaft and fuel pump can be damaged too. Low fuel pressure fault codes, misfires and poor running under load are typical signs. Checking the follower at regular intervals is a sensible precaution.
5. Coolant leaks (EA888 Gen 3)
The later Gen 3 engine solved many of the earlier problems, but its plastic water pump and thermostat housing can leak. Watch for a falling coolant level, a sweet smell after driving or a coolant warning light.
Is the Audi 2.0 TFSI engine reliable?
A well-maintained 2.0 TFSI can be a reliable engine, and the later EA888 Gen 3 is considered the strongest of the range. The engines with the worst reputation are the EA888 Gen 2 units (oil consumption) and early engines with the original timing chain tensioner. Before buying a used Audi with this engine, check the service history, ask whether the tensioner and piston rings have been updated, and listen for a cold-start rattle.
How to protect your engine
- Keep to the manufacturer’s service schedule, using the correct oil specification.
- Check the oil level regularly, especially on Gen 2 engines.
- Don’t ignore a cold-start rattle, a misfire or an engine management light.
- Have fault codes read properly with dealer-level diagnostics, not just a generic code reader.
Audi 2.0 TFSI diagnostics and repairs at Tektronic
We’re an independent Audi and VW specialist in Alva, near Stirling. We diagnose 2.0 TFSI faults with ODIS, the same diagnostic software Audi dealers use, so we can see exactly what the engine is doing before any work starts. From oil consumption and timing chain faults to misfires and coolant leaks, we’ll find the cause and explain your options clearly.
Act early, pay less. Most big engine bills start as a small warning. Call us at the first sign and it’s usually a smaller job.
Call 01786 625 624 or see our Audi specialist services.